Stand for groove brake discs BM 4000

The stand is designed to protecive car brake discs, front and rear. Protecive discs directly on the car with the two surfaces of the disk simultaneously. This provides a precise groove in the plane of the axis of the car. It is used to eliminate irregularities, edges, rust. Groove discs (levelling/polishing) is recommended each time you replace brake pads and runout of the discs when braking. After the procedure groove the beats disappear and it provides 100% braking. Provides the groove at different speeds.

Includes:

- A drive for the rotation axis of the vehicle;

- The flow machine;

System universal mounts USSH;

- Accessories.

Specifications

The lathe discs

The maximum thickness protecive of drive: 40 mm;

The accuracy of the feed mechanism cutters: 0.1 mm;

Feed speed: 10 mm/min;

Net weight: 6.5 kg.

The drive for the rotating axis auto

Range of working heights optional SK-530: 0,9 -1,3

Rotation speed: 96 rpm;

Parameters power supply: 220 V, 50/60 Hz;

Net weight: 64 kg;

Operating temperature range: -5 to +35 °C.

Precision machining

Wheel runout: 0.05 mm;

The error of thickness of the disc: 0,002 - 0,005 mm;

The surface roughness Ra of the disk: 1,5 - 2,0 mm;

Noise level (with the exception of adjustments for room size of 4 dB) NEN-ISO 112042 and ISO 3746: 74 DB.